İyi akşamlar. Vapoursynth'i derlemek icin once zimg denilen bu yazılımı derlemem gerekiyor. Son aşamaya kadar her şey sıkıntısız işliyor fakat son aşamada sıkıntı cıkarıyor. Ne istediğini veya neyin eksik olduğunu bilmiyorum.

https://github.com/sekrit-twc/zimg deposundan indirdim.

Kod:Panoya kopyala
git clone https://github.com/sekrit-twc/zimg.git cd zimg ./autogen.sh ./configure make -j4 sudo make install

Kodları ile paketlemeye calıştım.

make -j4 komutunda ise bu hatayı veriyor;
Kod:Panoya kopyala
make[1]: Entering directory '/home/cruslan/Belgeler/build/zimg' make[1]: *** No rule to make target 'graphengine/graphengine/cpuinfo.cpp', needed by 'graphengine/graphengine/libzimg_internal_la-cpuinfo.lo'. Durdu. make[1]: *** Bitmemiş işler icin bekliyor.... CXX dummy.lo make[1]: Leaving directory '/home/cruslan/Belgeler/build/zimg' make: *** [Makefile:4171: all-recursive] Error 1


Yapabildiğim kısma kadar olan komutlar, belki işe yarar;

Kod:Panoya kopyala
[email protected]:~/Belgeler/build$ git clone https://github.com/sekrit-twc/zimg.git Klonlama konumu: 'zimg'... remote: Enumerating objects: 12521, done. remote: Counting objects: 100% (1320/1320), done. remote: Compressing objects: 100% (482/482), done. remote: Total 12521 (delta 878), reused 1216 (delta 829), pack-reused 11201 Nesneler alınıyor: 100% (12521/12521), 2.91 MiB | 2.33 MiB/sn, bitti. Deltalar cozuluyor: 100% (9108/9108), bitti. [email protected]:~/Belgeler/build$ cd zimg [email protected]:~/Belgeler/build/zimg$ ./autogen.sh autoreconf: Entering directory `.' autoreconf: configure.ac: not using Gettext autoreconf: running: aclocal --force -I m4 autoreconf: configure.ac: tracing autoreconf: running: libtoolize --copy --force libtoolize: putting auxiliary files in '.'. libtoolize: copying file './ltmain.sh' libtoolize: putting macros in AC_CONFIG_MACRO_DIRS, 'm4'. libtoolize: copying file 'm4/libtool.m4' libtoolize: copying file 'm4/ltoptions.m4' libtoolize: copying file 'm4/ltsugar.m4' libtoolize: copying file 'm4/ltversion.m4' libtoolize: copying file 'm4/lt~obsolete.m4' autoreconf: running: /usr/bin/autoconf --force autoreconf: configure.ac: not using Autoheader autoreconf: running: automake --add-missing --copy --force-missing configure.ac:10: installing './compile' configure.ac:10: installing './config.guess' configure.ac:10: installing './config.sub' configure.ac:7: installing './install-sh' configure.ac:7: installing './missing' Makefile.am: installing './depcomp' parallel-tests: installing './test-driver' autoreconf: Leaving directory `.' [email protected]:~/Belgeler/build/zimg$ ./configure checking for a BSD-compatible install... /usr/bin/install -c checking whether build environment is sane... yes checking for a thread-safe mkdir -p... /usr/bin/mkdir -p checking for gawk... gawk checking whether make sets $(MAKE)... yes checking whether make supports nested variables... yes checking whether make supports nested variables... (cached) yes checking build system type... x86_64-pc-linux-gnu checking host system type... x86_64-pc-linux-gnu checking how to print strings... printf checking whether make supports the include directive... yes (GNU style) checking for gcc... gcc checking whether the C compiler works... yes checking for C compiler default output file name... a.out checking for suffix of executables... checking whether we are cross compiling... no checking for suffix of object files... o checking whether we are using the GNU C compiler... yes checking whether gcc accepts -g... yes checking for gcc option to accept ISO C89... none needed checking whether gcc understands -c and -o together... yes checking dependency style of gcc... gcc3 checking for a sed that does not truncate output... /usr/bin/sed checking for grep that handles long lines and -e... /usr/bin/grep checking for egrep... /usr/bin/grep -E checking for fgrep... /usr/bin/grep -F checking for ld used by gcc... /usr/bin/ld checking if the linker (/usr/bin/ld) is GNU ld... yes checking for BSD- or MS-compatible name lister (nm)... /usr/bin/nm -B checking the name lister (/usr/bin/nm -B) interface... BSD nm checking whether ln -s works... yes checking the maximum length of command line arguments... 1572864 checking how to convert x86_64-pc-linux-gnu file names to x86_64-pc-linux-gnu format... func_convert_file_noop checking how to convert x86_64-pc-linux-gnu file names to toolchain format... func_convert_file_noop checking for /usr/bin/ld option to reload object files... -r checking for objdump... objdump checking how to recognize dependent libraries... pass_all checking for dlltool... no checking how to associate runtime and link libraries... printf %sn checking for ar... ar checking for archiver @FILE support... @ checking for strip... strip checking for ranlib... ranlib checking command to parse /usr/bin/nm -B output from gcc object... ok checking for sysroot... no checking for a working dd... /usr/bin/dd checking how to truncate binary pipes... /usr/bin/dd bs=4096 count=1 checking for mt... mt checking if mt is a manifest tool... no checking how to run the C preprocessor... gcc -E checking for ANSI C header files... yes checking for sys/types.h... yes checking for sys/stat.h... yes checking for stdlib.h... yes checking for string.h... yes checking for memory.h... yes checking for strings.h... yes checking for inttypes.h... yes checking for stdint.h... yes checking for unistd.h... yes checking for dlfcn.h... yes checking for objdir... .libs checking if gcc supports -fno-rtti -fno-exceptions... no checking for gcc option to produce PIC... -fPIC -DPIC checking if gcc PIC flag -fPIC -DPIC works... yes checking if gcc static flag -static works... yes checking if gcc supports -c -o file.o... yes checking if gcc supports -c -o file.o... (cached) yes checking whether the gcc linker (/usr/bin/ld -m elf_x86_64) supports shared libraries... yes checking whether -lc should be explicitly linked in... no checking dynamic linker characteristics... GNU/Linux ld.so checking how to hardcode library paths into programs... immediate checking whether stripping libraries is possible... yes checking if libtool supports shared libraries... yes checking whether to build shared libraries... yes checking whether to build static libraries... yes checking for g++... g++ checking whether we are using the GNU C++ compiler... yes checking whether g++ accepts -g... yes checking dependency style of g++... gcc3 checking how to run the C++ preprocessor... g++ -E checking for ld used by g++... /usr/bin/ld -m elf_x86_64 checking if the linker (/usr/bin/ld -m elf_x86_64) is GNU ld... yes checking whether the g++ linker (/usr/bin/ld -m elf_x86_64) supports shared libraries... yes checking for g++ option to produce PIC... -fPIC -DPIC checking if g++ PIC flag -fPIC -DPIC works... yes checking if g++ static flag -static works... yes checking if g++ supports -c -o file.o... yes checking if g++ supports -c -o file.o... (cached) yes checking whether the g++ linker (/usr/bin/ld -m elf_x86_64) supports shared libraries... yes checking dynamic linker characteristics... (cached) GNU/Linux ld.so checking how to hardcode library paths into programs... immediate checking whether C++ compiler accepts -std=c++14... yes checking whether C compiler accepts -fvisibility=hidden... yes checking whether gcc is Clang... no checking whether pthreads work with -pthread... yes checking for joinable pthread attribute... PTHREAD_CREATE_JOINABLE checking whether more special flags are required for pthreads... no checking for PTHREAD_PRIO_INHERIT... yes checking whether C compiler accepts -mtune=sandybridge... yes checking whether C compiler accepts -mtune=ivybridge... yes checking whether C compiler accepts -mtune=haswell... yes checking whether C compiler accepts -mtune=skylake-avx512... yes checking whether C compiler accepts -mtune=cascadelake... yes checking whether C compiler accepts -mavx512f -mavx512pf -mavx512er -mavx512cd -mavx512vl -mavx512bw -mavx512dq -mavx512ifma -mavx512vbmi -mavx512vbmi2 -mavx512bitalg -mavx512vpopcntdq -mavx512vnni... yes checking that generated files are newer than configure... done configure: creating ./config.status config.status: creating Makefile config.status: creating zimg.pc config.status: executing depfiles commands config.status: executing libtool commands [email protected]:~/Belgeler/build/zimg$ make -j4 make[1]: Entering directory '/home/cruslan/Belgeler/build/zimg' make1: *** No rule to make target 'graphengine/graphengine/cpuinfo.cpp', needed by 'graphengine/graphengine/libzimg_internal_la-cpuinfo.lo'. Durdu. make1: *** Bitmemiş işler icin bekliyor.... CXX dummy.lo make1: Leaving directory '/home/cruslan/Belgeler/build/zimg' make: *** Makefile:4171: all-recursive Error 1