Şimdi yeni aldığım set geldi taktım Arduino UNO R3'u.
Actım Arduino IDE'yi ilk kodumu atayım derken bir hatayla karşılaştım.
Surprizbozan: Hata Kod:Panoya kopyala
avrdude: Version 6.3-20190619 Copyright (c) 2000-2005 Brian Dean, http://www.bdmicro.com/ Copyright (c) 2007-2014 Joerg Wunsch. System wide configuration file is "C:Program FilesWindowsAppsArduinoLLC.ArduinoIDE_1.8.57.0_x86 __mdqgnx93n4wtthardwaretoolsavr/etc/avrdude.conf" Using Port : COM3. Using Programmer : arduino. Overriding Baud Rate : 115200. avrdude: stk500_getsync() attempt 1 of 10: not in sync: resp=0xf8 avrdude: stk500_recv(): programmer is not responding. avrdude: stk500_getsync() attempt 2 of 10: not in sync: resp=0xf8 avrdude: stk500_recv(): programmer is not responding. avrdude: stk500_getsync() attempt 3 of 10: not in sync: resp=0xf8 avrdude: stk500_recv(): programmer is not responding. avrdude: stk500_getsync() attempt 4 of 10: not in sync: resp=0xf8 avrdude: stk500_recv(): programmer is not responding. avrdude: stk500_getsync() attempt 5 of 10: not in sync: resp=0xf8 avrdude: stk500_recv(): programmer is not responding. avrdude: stk500_getsync() attempt 6 of 10: not in sync: resp=0xf8 avrdude: stk500_recv(): programmer is not responding. avrdude: stk500_getsync() attempt 7 of 10: not in sync: resp=0xf8 avrdude: stk500_recv(): programmer is not responding. avrdude: stk500_getsync() attempt 8 of 10: not in sync: resp=0xf8 avrdude: stk500_recv(): programmer is not responding.





Deniyorum olmuyor FT232rli klon calışıyor ama orijinal bozuk.
Ama sacma olan şey Bootloader'i olmayan bir cipi var.
Surprizbozan: cip adı modeli atmel 35473D
Atmega328 U
2009t34