Elimde orijinal Arduino var. Kendi uygulamasından yazılım atmaya calışınca hata veriyor. Port doğru secili kartta secili guncelleme de yaptım ama olmuyor kart 0 ama hata veriyor.

Hata kodu bu:

Kod:Panoya kopyala
Arduino:1.8.19 (Windows 10), kart:"Arduino UNO" Calışmanız programın 924 Bayt (2 %) saklama alanını kullandı. Maksimum 32256 Bayt. Global değişkenler belleğin 9 byte kadarını (0%) kullanıyor. Yerel değişkenler icin 2039 byte yer kalıyor. En fazla 2048 byte kullanılabilir. Avrdude: stk500_recv(): programmer is not responding. Avrdude: stk500_getsync() attempt 1 of 10: not in sync: resp=0x91 Avrdude: stk500_recv(): programmer is not responding. Avrdude: stk500_getsync() attempt 2 of 10: not in sync: resp=0x91 Avrdude: stk500_recv(): programmer is not responding. Avrdude: stk500_getsync() attempt 3 of 10: not in sync: resp=0x91 Avrdude: stk500_recv(): programmer is not responding. Avrdude: stk500_getsync() attempt 4 of 10: not in sync: resp=0x91 Avrdude: stk500_recv(): programmer is not responding. Avrdude: stk500_getsync() attempt 5 of 10: not in sync: resp=0x91 Avrdude: stk500_recv(): programmer is not responding. Avrdude: stk500_getsync() attempt 6 of 10: not in sync: resp=0x91 Avrdude: stk500_recv(): programmer is not responding. Avrdude: stk500_getsync() attempt 7 of 10: not in sync: resp=0x91 Avrdude: stk500_recv(): programmer is not responding. Avrdude: stk500_getsync() attempt 8 of 10: not in sync: resp=0x91 Avrdude: stk500_recv(): programmer is not responding. Avrdude: stk500_getsync() attempt 9 of 10: not in sync: resp=0x91 Avrdude: stk500_recv(): programmer is not responding. Problem uploading to board. See https://support.arduino.cc/hc/en-us/sections/360003198300 for suggestions. Avrdude: stk500_getsync() attempt 10 of 10: not in sync: resp=0x91 This report would have more information with. "Show verbose output during compilation" Option enabled in file -> preferences.