Oncelikle herkese merhaba

Agdaki yazıcının (hp laserjet 2300 serisi) isletim sistemi 32 bit xp, ona baglanmak icin kullanılan bilgisayarın isletim sistemi W7 64 bit
agdaki yazıcıyı goruyor ama bir turlu baglanmıyor ne yaptıysam olmadı
1- Local port acıp bilgisayar ismini girdim
2- TCP/IP ile girdim
3- Driver yukledim
4- Guvenlik duvarları kapalı

Hic biri fayda etmedi en sonunda nette soyle bir yazı buldum ama anlamadıgım kısımlar var

First, make sure the printer is installed and running correctly from the main computer that it is connected to. Then download the 64 bit (or 32 bit drivers if the computer that is connected to the printer is a 64 bit system) driver for your printer. Most printer manufacturers list drivers for both 32-bit and 64-bit versions of Windows, and often both drivers are in the same installer.
Next, run the installer on the host computer (the one the printer is connected to) just like you were going to install the driver on the computer. Then when it asks if you want to update or uninstall, click cancel.
Now, you need to find the folder that driver was extracted to. Open Run (Win+R), and type in “C:\Users\your user name\appdata\local\temp” without the quotes, and substitute your user name where I have the user name in italics. Now find the folder that was created most recently and doesn’t begin with a parenthesis.
On my computer, after installing an HP printer the folder name started with a “7z” and then had a half dozen other random characters. The folder should contain folders that say things like drivers, images, and a couple of other things, and it should also contain a lot of files that have the model name of your printer. Now click on the address bar, select the entire line, and copy it (Ctrl+A and then Ctrl+C).
Now the instructions change a little depending if you are using Windows Vista or Windows 7.
If you are using Windows Vista (or Windows XP), open the control panel, click on printers, then right click on the name of the printer that you want to add the drivers for. Click Properties, sharing, then click “Change Sharing Options.” Check the box that says “Share this printer,” and then click the button that says “Additional Drivers.” Skip the next paragraph, then follow the remaining directions.
If you’re using Windows 7, open the start menu, click on Network, then double-click on your computer’s name. Now click on the link in the top menu bar that says “View remote printers.” Right click on the name of the printer you wish to share, click properties, and then click the tab that says sharing. Check the box that says “Share this printer,” and then click the button that says “Additional Drivers.” Now follow the remaining directions.
After clicking the “Additional Drivers” button, check the box beside the version of Windows you wish to add drivers for (x86 for 32 bit or x64 for 64 bit). When you click Ok, it will ask you for the location of the drivers. Paste (Ctrl+A and then Ctrl+V) the name of the folder that you found in the step before last. Close the dialogs when they are finished. Congratulations; you have now installed the additional drivers!
Finally, return to your computer that you will be using to print over the network, and add the network connected printer. It should install easily now, and you should be printing in minutes.

anlamadıgım yer ise aslında en can alıcı kısım;

Next, run the installer on the host computer (the one the printer is connected to) just like you were going to install the driver on the computer. Then when it asks if you want to update or uninstall, click cancel.

Now, you need to find the folder that driver was extracted to. Open Run (Win+R), and type in “C:\Users\your user name\appdata\local\temp” without the quotes, and substitute your user name where I have the user name in italics. Now find the folder that was created most recently and doesn’t begin with a parenthesis.

On my computer, after installing an HP printer the folder name started with a “7z” and then had a half dozen other random characters. The folder should contain folders that say things like drivers, images, and a couple of other things, and it should also contain a lot of files that have the model name of your printer. Now click on the address bar, select the entire line, and copy it (Ctrl+A and then Ctrl+C).

Birinci olarak 32 bit isletim sisteminde 64 bitin installerını gormuyor, burada run installer dedigi seyi yaptıktan sonra 32 bitte calısmaz uyarısı geliyor,
İkinci olarak driver dosya zipli (hp nin kendi sitesinden) ac deyip sonra orada tırnak icinde kalan kısmı yazıyorum ama bir italik demis o kısımlarıda anlamadım
Aslında kısaca ne yapmam gerekiyor cunku yazının sonunda adam tamam bundan sonra kullanabilirsiniz diyor aslında amac belli 32 bit isletim sisteminde 64 bit icin calısır hale getirmek ama bir turlu olmadı.

Yardım ederseniz cok sevinirim

Cevaplarınızı bekliyorum
__________________